宣傳單頁印刷完成后，為了使其更加美觀大方，我們通常會進行各種印后加工技術。下面我們來介紹一下
濟南宣傳單頁印刷的加工技術，如下：
After the leaflet is printed, in order to make it more beautiful and generous, we usually carry out various post-press processing technologies. Now let's introduce the processing technology of Jinan leaflet printing, as follows:
1.覆膜：覆膜可分為光澤膜和啞光膜。光膜是在表面具有反射作用的膜，能提高印刷品的亮度、平滑度，使色彩更鮮艷、更生動，更具有時尚感。同時，它還可以防水，增加耐久性，并抵抗皺紋。
1. Film covering: film covering can be divided into glossy film and matte film. Light film is a film with reflective effect on the surface, which can improve the brightness and smoothness of the printed matter, make the color more bright, vivid and fashionable. At the same time, it can also be waterproof, increase durability and resist wrinkles.
2.圓角：印刷品一般在印刷后不經加工而裁切，即裁切成直角。當然，如果你想把它削成圓角，也是可以的。圓角一般為4MM左右。
2. Round corner: printed matter is generally cut without processing after printing, that is, cut into right angles. Of course, if you want to cut it into round corners, you can also. The fillet is generally about 4MM.
3.異形加工：異形是指各種不規則的形狀。這個過程就是生產一個模具。根據形狀制作模具。成品印刷完成后，可隨模具切割成異形。
3. Abnormal processing: abnormal refers to various irregular shapes. This process is to produce a mold. First, make the mold according to the shape. After the finished product is printed, it can be cut into special shapes with the mold.
4.折疊過程：有半折、眼袋折、心折、器官折、半折、兩折，所有這些都可以根據大小折疊、卷曲、。
4. Folding process: there are half fold, eye bag fold, heart fold, organ fold, half fold and two fold, all of which can be folded, curled and folded according to size.
5.鏤空工藝：鏤空有點像異形，同樣需要模壓，但異形是切割外部，鏤空是切割印刷品內部。
5. Hollow-out process: hollow-out is a bit like a special shape, which also needs to be molded, but the special shape is to cut the outside, and the hollow-out is to cut the inside of the printed matter.
6.燙印工藝：燙印不限于紙張，任何紙張無論哪種方式，燙印都須先為要燙印的零件制作一個模具。打印時，一定要去掉燙印件。打印后，可進行熱燙印。
6. Hot stamping process: hot stamping is not limited to paper. No matter which way, hot stamping must first make a mold for the parts to be hot stamped. When printing, the hot stamping part must be removed. After printing, hot stamping can be performed.
7.凹凸工藝：學名叫壓印，它依靠壓力使被印物局部發生變化而形成圖案。金屬板被腐蝕后，成為壓制用的壓板和底板。凹凸制版紙一般較厚，因此，對壓花名片的要求是，被壓花的部分不能印刷，因為壓花不準確，影響美觀。
7. Bump process: scientific name is embossing, which depends on pressure to change the part of the printed object to form a pattern. After the metal plate is corroded, it becomes the pressing plate and base plate for pressing. The concave and convex plate making paper is generally thick, so the requirement for embossed business cards is that the embossed part cannot be printed because the embossing is inaccurate, which affects the beauty.
8.高端水晶工藝品：水晶工藝品對紙張有要求，銅版紙不能作為水晶工藝品使用，因為小型膠印機不能打印銅版紙，可以使用其他紙張（包括特種紙）。水晶工藝名片先在機器上打印，打印一次后，迫不及待地將墨汁干透后迅速涂上壓花粉，放在壓花機上（即水晶工藝），水晶工藝就完成了。
8. High-end crystal handicrafts: crystal handicrafts have requirements for paper. Coated paper cannot be used as crystal handicrafts, because small offset presses cannot print coated paper, and other paper (including special paper) can be used. The crystal craft business card is printed on the machine first. After printing it once, you can't wait to dry the ink and quickly apply the pressed pollen, and put it on the embossing machine (i.e. crystal craft). The crystal craft is completed.
This is the processing technology of the printed leaflet. We have learned this knowledge from eight aspects. I hope it can help you. More matters will come to our website http://www.ardmoreoilandgas.com Consult!
濟南華政印務有限公司
