其實從濟南精裝書制作印刷過程來說確實和平裝書沒有太大差別說起印刷精裝書，相信很多人有一種認為，和平裝書相比也沒有太多要求，制作成本相差應該不會太大。

In fact, in terms of the production and printing process of Jinan hardcover books, there is really no big difference between paperback books and paperback books. Speaking of printing hardcover books, many people believe that there are not many requirements for paperback books, and the difference in production costs should not be too big.

從精裝書印刷過程來說確實和平裝書沒有太大差別，但做好精裝書關鍵在精裝封面的制作。精裝書的封面、封底一般采用絲織品、漆布、人造革、皮革或紙張等材料，粘貼在硬紙板表面作成書殼。

From the perspective of the printing process of hardcover books, it is true that there is no big difference between paperback books and paperback books, but the key to do a good job of hardcover books is the production of hardcover covers. The cover and back cover of a hardcover book are generally made of silk, lacquered cloth, artificial leather, leather or paper and pasted on the surface of the cardboard to form a book case.

精裝書書芯制作的前一部分和平裝書裝訂工藝相同，包括：裁切、折頁、配頁、鎖線與切書等。書芯為圓背有脊形式，可在平裝書芯的基礎上，經過壓平、刷膠、干燥、裁切、扒圓、起脊、刷膠、粘紗布、再刷膠、粘堵頭布、粘書脊紙、干燥等完成精裝書芯的加工。書芯為方背無脊形式，不需要扒圓。書芯為圓背無脊形式，不需要起脊。

The former part of the hardcover book block production is the same as the binding process of the paperback book, including cutting, folding, matching, sewing and book cutting. The book block is in the form of a round back with a ridge. On the basis of the paperback book block, the hardcover book block can be processed through flattening, gluing, drying, cutting, rounding, ridging, gluing, gluing, gluing gauze, re-brushing, gluing cloth, gluing spine paper, drying, etc. The book block is in the form of square back without ridge, so it does not need to be rounded. The book block is in the form of a round back without a ridge.

書殼是精裝書的封面。書殼的材料應有一定的強度和耐磨性，并具有裝飾的作用。用一整塊面料，將封面、封底和背脊連在一起制成的書殼，叫做整料書殼。封面、封底用同一面料，而背脊用另一塊面料制成的書殼，叫做配料書殼。

The book case is the cover of a hardcover book. The material of the book case should have certain strength and wear resistance, and have the function of decoration. A book case made of a whole piece of fabric that connects the cover, back cover and back is called a whole book case. The cover and back cover are made of the same fabric, while the back is made of another fabric, which is called the matching book case.

作書殼時，先按規定尺寸裁切封面材料并刷膠，然后再將前封、后封的紙板壓實、定位（稱為擺殼），包好邊緣和四角，進行壓平即完成書殼的制作。由于手工操作效率低，現改用機械制書殼。

When making the book case, first cut the cover material according to the specified size and brush the glue, then compact and position the front and rear seal paperboard (called the swing case), wrap the edges and corners, and then flatten the book case. Due to the low efficiency of manual operation, the mechanical book case is now used.

把書殼和書芯連在一起的工藝過程，叫做上書殼，也叫套殼。上書殼的方法是：

The process of connecting the book case and the book block is called the upper book case, also called the casing. The way to mount the book case is:

先在書芯的一面襯頁上，涂上膠水，按一定位置放在書殼上，使書芯與書殼一面先粘牢固，再按此方法把書芯的另一面襯頁也平整地粘在書殼上，整個書芯與書殼牢固地連結在一起了。然后用壓線起脊機，在書的前后邊緣各壓出一道凹槽，加壓、烘干，使書籍印刷更加平整、定型，然后即可出印刷廠交付客戶。更多相關事項就來我們網站http://www.ardmoreoilandgas.com咨詢！

First, apply glue on one side of the book block and put it on the book case according to a certain position, so that the book block and the book case can be firmly glued on one side, and then the other side of the book block can be smoothly glued on the book case according to this method, so that the whole book block and the book case are firmly connected. Then press a groove on the front and back edges of the book with a line pressing and ridging machine, press and dry it to make the book printing more flat and stereotyped, and then deliver it to the customer from the printing factory. Come to our website for more relevant matters http://www.ardmoreoilandgas.com consulting service